Step 1
Ensure that Wi-Fi is enabled on your device by verifying that AirPort mode is Off.
Step 2
Select UR_Connected.
Step 3
Depending on the protocol for authentication (i.e. whether you use PEAP or LEAP), there are two possible entries for User Name:
- For PEAP- enter ur followed by your domain account user name
- For LEAP- enter your domain account user name without ur
*If you are not sure, try option 1 first, then option 2.*
Enter your domain account Password.
Verify that 802.1X field is set to Automatic.
Check the option to Remember this network.
Click OK.
